AS150C mSATA Solid State Drive
Engineered for Seamless Integration and Rugged Stability
AS150C mSATA Solid State Drive
KEY FEATURES
- Features a standard mSATA form factor and SATA III 6Gb/s interface, supporting seamless storage upgrades for legacy industrial systems
- Supporting advanced LDPC ECC mechanism and RAID Engine, significantly enhancing data transmission accuracy
- Built-in dynamic and static Wear-Leveling along with background Garbage Collection
- Equipped with Thermal Throttling and Power Saving Support to reduce system energy consumption and maintain operational stability
SLC Cache
3D NAND
LDPC Error Correction
Standard mSATA Form Factor and Broad System Compatibility
The Premier Upgrade Choice for Space-Constrained and Legacy Systems
- The AS150C utilizes a standard mSATA form factor, offering the advantage of an ultra-compact and lightweight design perfectly suited for space-constrained devices and embedded systems. Supporting the SATA III 6Gb/s interface and backward compatible with SATA 1.5/3.0 Gb/s standards, it seamlessly meets the storage upgrade requirements of various legacy industrial machines while delivering smooth read/write speeds of up to 520/500 MB/s.
Advanced Error Correction and Protection Mechanisms to Safeguard Data Integrity
Built-in LDPC ECC Engine and RAID Engine
- The AS150C is equipped with an advanced LDPC ECC engine and a RAID Engine architecture. This highly efficient protection mechanism proactively detects and corrects potential errors during data transmission and storage, significantly reducing the risk of data loss and providing a robust and reliable data security defense network for enterprise edge devices.
Intelligent Thermal and Energy Management to Maximize SSD Lifespan
Dynamic Wear-Leveling and Thermal Throttling Design
- To maximize product lifespan and system performance, the AS150C features built-in dynamic and static Wear-Leveling along with background Garbage Collection, ensuring that flash memory blocks are evenly erased and written. Simultaneously, equipped with a Thermal Throttling function, it proactively monitors temperatures and dynamically adjusts power consumption, effectively preventing system crashes induced by overheating.
Specifications
Capacity
128GB / 256GB / 512GB
NAND Flash
3D NAND
Form factor
mSATA
Interface
6Gb/s SATA III
Dimensions(L x W x H)
50.95 x 30.00 x 3.50mm
Read/Write(Max)*
Sequential Read up to 520 MB/s, Sequential Write up to 500 MB/s
Shock resistance
1500G/0.5ms
Operating Temperature
0°C–70°C
Storage Temperature
-40°C–85°C
MTBF
1,500,000 hours
Warranty
3 Years / TBW (whichever comes first)
Product FAQ
Please try the following steps to resolve the issue:
Step 1. Turn off your computer and disconnect all other storage drives, leaving only the target SSD connected.
Step 2. Enter your motherboard's BIOS, restore the default settings, and ensure that both AHCI and UEFI modes are enabled. Save the configuration and exit.
Step 3. Boot into the OS installer. When you reach the drive selection screen, delete all existing partitions on the target SSD, and then proceed with the installation.
Windows 11, Windows 10, and modern Linux distributions include native support for PCIe NVMe drives and can be installed directly. Please ensure your motherboard's BIOS is updated to the latest version and configured to UEFI mode. If the SSD is not detected during the Windows installation process, you may need to download and load the specific storage controller drivers (such as Intel VMD/RST) provided by your motherboard or laptop manufacturer. For further assistance, please refer to the following link or contact Microsoft: https://support.microsoft.com/
This is normal. The discrepancy is due to system calculations and allocation of space for firmware, software, and data management, which help enhance performance and prolong lifespan.
Please check the following:
1. Hardware Connection: Ensure that the data cable, power cable, and motherboard slot are properly and securely connected.
2. System Initialization: Right-click the Start menu > select “Disk Management” > locate the unallocated SSD > right-click it and select “New Simple Volume” to initialize the drive.
Please refer to the installation guide provided. If product damage, installation errors (e.g., misalignment or poor adhesion), or other issues occur, do not forcibly disassemble the unit. Doing so may cause physical damage. Contact customer service and return the product for proper handling.
Yes, but the data transfer speed will be limited by the motherboard and will not reach SATA 6 Gb/s performance.
This is normal. The difference in capacity is due to the different calculation methods used by computer operating systems, along with a portion of the space being reserved for firmware, software, and data management. This reserved space helps enhance the solid-state drive's performance and extend its lifespan.
Actual performance may vary depending on your system hardware, software environment, and whether the SSD is used as a boot drive (with an OS installed). These variations are completely normal.
